Kraus Radial Caliper Hardware Kit 80mm For Harley Davidson Models With Radial Mounted Caliper With M10-1.25 Thread (UN-BR-T80-BB)

• Use these kits to properly space and mount radial brake calipers to Kraus Caliper Mounts.
• The 12-point high grade Anodized G5 Titanium flanged bolt allows for increased torque and holding power and corrosion resistance while decreasing weight and offering premium performance.
• 2.5mm Aluminum Spacers stack to form all commonly needed spacing. For use with aftermarket radial calipers.
• If using any OE calipers we recommend setting the caliper in place and measuring for proper spacing.
• Each kit will mount one caliper.

TECHNICAL:

• G5 Titanium

Torque specs:

• 47 ft lbs (65 nm)

FITMENT:

See PDF Fitment Guide

NOTE:

• These bolts kits are designed to run with Kraus caliper mounts.
• If you're not running Kraus radial caliper adapter's, make sure the thread pitch of your mounts are M10-1.25.

60mm kit - UN-BR-60-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 60mm).
• 8 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 0mm-10mm.
• Use with DYNAMOTO RADIAL CALIPER MOUNTS and 11.5" or 11.8" brake rotors.

70mm kit - UN-BR-70-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 70mm).
• 14 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 10mm-18mm.
• Use with REAR RADIAL CALIPER MOUNTS and 11.5" or 11.8" brake rotors.
• Use with DYNAMOTO FRONT RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.
• Use with KRT RADIAL CALIPER MOUNTS and 11.8" brake rotors.

80mm kit - UN-BR-80-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 80mm).
• 22 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 20mm-28mm.
• Use with KRT RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.
• Use with FRONT AXIAL TO RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.